User's Manual

EWS-150g Configuration Guide 17
EWS-150g Configuration Guide
Updating the Firmware
To update the EWS-150g firmware, you must first establish the FTP file transfer parameters so that the unit
knows where to locate the new image file. To do this, click on the Configure tab then click on Firmware
Updates to display the Firmware updates window.
Figure 16. Firmware Updates Window
After entering the FTP location parameters, click on Update to apply your change then click on Reboot to
reboot the unit. When the unit has completed its reboot process, go to the home page and click on Load
Firmware to display the Load Firmware window. If you need to change the FTP location parameters, click on
the FTP Parameters link, otherwise click on the Start Download button to begin the firmware update
procedure.
Figure 17. Updating the Firmware