User's Guide

MWS100 Configuration Guide
Strix Systems Access/One Edge
MWS100 Mobile Wireless System
6
5. Wireless Station Configuration
5 Wireless Station Configuration
MWS100 configuration screens may be accessed by connecting its LAN port to a
computer running Microsoft Internet Explorer Version 7. The default address of
http://169.254.1.250 may be used. The username for configuration is “Admin” (without
the quotes). The default password is “Admin” (also without quotes).
Important: After changing any parameter on any
configuration screen, an “Update” button will appear near
the upper-right corner of the screen. This must be pressed
for any change to take effect. Some changes require that
the MWS100 be re-booted. This is indicated by the
appearance of a “Reboot” button, which must be pressed
for the change to take effect.
The first step to configure an MWS100 is to select which radio will be used as a Wireless
Station to connect to the Strix Access/One® mesh network. The 11a radio is the default
for this. This may be changed from the “Configure  WiFi  General” screen.
Press the “Update” button if Station Radio selection is changed, followed by the “Reboot”
button.