User's Guide

MWS100 Configuration Guide
Strix Systems Access/One Edge
MWS100 Mobile Wireless System
8
6. Wireless Access Point Configuration
6
Wireless Access Point
Configuration
The Access Point radio may now be configured on the “Configure  Wi-Fi  AP
Configuration” screen. Set the SSID which client radios will use to connect to the
MWS100. The default behavior is for this SSID to be broadcast. This may be overridden
with the “Suppress SSID” checkbox. Enter Security Mode and Keys. Access may be
further restricted to specific client MAC addresses by pressing the “Manage ACL” button
to define an Access Control List.
After setting the AP radio parameters, press the “Update” button, then press the
“Reboot” button.