User's Guide

MWS100 Configuration Guide
Strix Systems Access/One Edge
MWS100 Mobile Wireless System
5
4. Using the supplied fused power cable, connect the BLACK wire to the vehicle
ground and then attach the RED wire to the vehicle positive DC supply. The
MWS100 is designed to operate from a minimum of 11 VDC
*
to a maximum
of 52 VDC and a maximum current draw of 2 A.
*
A low-voltage cut-off circuit prevents the MWS100
from draining the vehicle battery. The unit will
automatically power down when the DC voltage falls
below 10.5 VDC. Operation will be restored once the
DC voltage rises above 11.5 VDC.
The MWS100 may also be powered over its Ethernet
port (LAN) by a PoE power injector capable of
sourcing 20 W.
5. Provide an Ethernet cable for connecting the MWS100 to a computer or
router.
6. Attach the supplied fused power cable to the PWR connector on the
EWS100 rear panel. Observe the LED indicator activity as described on page
2.