Installation Manual

ManualsBrandsStrix Systems ManualsElectronics802.11 a/b/g 4.9 GHz Wireless, Mesh Access Point

OWS Field Installation 5

OWS Field Installation

6. Use a 7/16 inch nut wrench to

tighten the U-bolts (4 nuts) and

secure the OWS enclosure in

place.

Tighten all four nuts to 10–12

lbf.ft (1.38–1.66 kgf.m).

When tightening the U-bolts,

ensure that the bolts are not

twisted—the ends of each U-bolt

should be protruding through the

bracket evenly (the same

distance).

7. Check that the U-bolts are tight

and that the OWS enclosure is

securely anchored to the pole.

Tighten (4 places)