User's Manual Part 2

Access / One
®
Network
42 Updating the Firmware
3
4. Go to Manage>Actions and choose the Load Firmware/Configuration
command. In the Action Configuration window, select Download (for
Action Type) and select Image (for File Type). With these selections, the File
Version field is grayed out (not accessible).
Figure 25. Action Configuration Window
5. Click on the Download Now button to download the new firmware to the
module. The update process will take a few minutes. Manager/One will
confirm when the process completes successfully.
Figure 26. Firmware Update Completed Successfully
If the command fails, return to Step 2 and check that your FTP parameters
have been set up correctly. Do not reboot the module at this time.
If your FTP parameters are set up correctly and the command fails
repeatedly, try resetting the module to its factory default state and repeat
this procedure. In this case, after the firmware has been upgraded you will
need to reconfigure the module for your network.
6. When the update process has completed successfully, click on the Reboot
button to reboot the module—or click on the Go Back button if you prefer
to reboot the module at a later time (the Reboot command is also available
from the Manage/Actions menu). Rebooting is always required when any
configuration changes are made to a module.
Reboot