User's Manual Part 2

Access / One

Network

The Manager/One Interface 57

Node Operational Status Indicators

As Manager/One monitors your Access/One Network, it is continually monitoring

the operational status of its network nodes and the modules that reside within each

node. The operational status of a node or module is easily determined by how

Manager/One represents the node/module in its user interface—a combination of

graphics and color scheme. The operational status of a node or module can fall into

any of the following categories:

◗ Normal

The node/module is operating normally and is identified as a valid network

segment within your Access/One Network. The standard color scheme for

any node or module operating normally is GRAY.

◗ Factory Default

The node/module is set to its factory default state and is currently not

assigned to your Access/One Network. The standard color scheme for any

node set to its unassigned factory default state is BLUE.

◗ Link Lost

Access/One Network cannot establish a link (wired or wireless) with this

node or module. The standard color scheme for any node or module that has

lost its link to your Access/One Network is RED.

Figure 42. Operational Status of Nodes

Normal (IWS)

Default (IWS)

Link Lost (IWS) Link Lost (OWS)

Normal (OWS)