Installation Manual

OWS Field Installation 7
OWS Field Installation
Mounting the OWS on a Wall
Parts Required
◗ OWS enclosure.
◗ 4 nylon hangers, for mounting the OWS enclosure to a wall.
◗ 4 screws (10-32 x 0.375), for attaching the nylon hangers to the enclosure.
Tools Required
◗ Flat blade screwdriver ◗ Power drill and drill bit (if necessary)
1. Attach the 4 nylon hangers to the
OWS enclosure using the 4
screws provided.
2. Mount the OWS enclosure to any
wall surface, ensuring that the
unit is level and secure (4 places).
If mounting the enclosure to a
masonry wall, you will need a
power drill, masonry drill bit, and
wall plugs.
Nylon Hanger (x4)