User's Manual Part 1

Access / One
®
Network
4 Introduction
IN
Important Note About Rebooting
Your Access/One Network can be configured and managed at the network, subnet
or individual module levels. As a consequence, the Manager/One management
interface has different reboot commands for each level. These are:
◗ Reboot Network
When logged in at the network level, this command is accessed from the
Manage tab under Commands.
◗ Reboot ... Subnet or Network
When logged in at the subnet level, this command (with options for subnet or
network) is accessed from the Manage tab under Commands.
◗ Reboot
When logged in to an individual module, this command is accessed from the
Manage tab under Actions.
Before rebooting, always ensure that you are logged in at the correct management
level within Manager/One.
The Network Used in this Guide
For simplicity, the sample Access/One Network used in this User’s Guide is small,
consisting of just 3 IWS nodes and 2 OWS nodes. The designated master network
server is an IWS module attached to a router via a standard CAT5 Ethernet cable. All
other nodes are connected to the network wirelessly.
Product Images
Some of the images used in this document have been modified for clarity.