User's Manual Part 2

Access / One
®
Network
38 Updating the Firmware
3
3. Click on the Update button to inform Manager/One that you have made
changes to this page. When you click on the Update button you will notice
that the Apply Configuration tab changes to BLUE (to let you know that your
changes need to be applied across the network).
4. Click on the Apply Configuration tab to propagate your FTP session
changes across the network. You will be warned that the changes you made
with the Firmware Updates command will affect multiple devices on the
network.
Figure 20. Warning and Confirmation Request
5. Click on the OK button to confirm that you want to apply your changes
across the network, or click on the Cancel button to abort the process.
6. Go to Manage>Commands and use the Load Firmware on Network
command to load the new firmware’s image (BIN file) to all modules
contained in all network nodes within your Access/One Network.
When the firmware update process is started, you can review its progress in
the Command Progress frame (located at the top of the Details Pane).
Figure 21. Command Progress (Firmware)
Updating firmware across the entire network involves communicating with
all nodes and all modules within your Access/One Network. This process
will take several minutes to complete. When completed successfully, a
GREEN check mark appears next to the progress bar.
Success