User's Manual Part 2

Access / One
®
Network
40 Updating the Firmware
3
8. After the network has rebooted, click on the Inventory tab and verify that all
modules have been upgraded. You will find the version number in the far
right side column of the Inventory window.
If all your Access/One Network modules have been upgraded successfully,
go directly to Step 10 (skip Step 9).
Figure 23. Inventory Window
9. This step only applies if the firmware update process across the network
failed on any module(s). In this case, make a note of the affected module(s)
then go to “Updating Firmware on Individual Modules” on page 41.
Because Access/One Network does not support a mixed multi-version
environment, you must upgrade the firmware on ALL modules before
proceeding.
10. With the firmware update process now completed (all modules upgraded),
you can log into the master network server and resume managing your
Access/One Network.