User's Manual Part 2

Access / One

Network

Updating the Firmware 41

Updating Firmware on Individual Modules

1. From Manager/One, log in to the module you want to upgrade.

2. Go to Configure>System and use the Firmware Updates command to

configure your FTP parameters (so the system knows where to locate the

BIN files).

Figure 24. Firmware Updates Command (Module Level)

You must define the following:

• FTP Server (IP address or name: For example, ftp.myserver.com.

• User Name: Ask your network administrator.

• Password: Ask your network administrator.

• Path: Enter a path if you placed the BIN files in a specific directory.

• File Name: This field is exclusive to modules—it does not appear in the

Firmware Updates window at the network level. The file name is entered

here automatically by Manager/One (either accessone.bin or

accessone_m.bin), depending on which BIN file Manager/One sees

when it looks at the module’s existing configuration image. Do not

change the name of this file when updating the module’s firmware. The

file name in this field should be changed ONLY when updating

configuration files (not firmware).

3. After defining your FTP parameters, click on the Update button to apply

your changes to this module.