User's Manual Part 2

Access / One
®
Network
Managing the Network 69
5
Update Network Membership
This command must be executed at the subnet level. Go to “Update Network
Membership” on page 69.
Transfer System Files
This command allows you to transfer network (cloud) or device (module)
configuration files between the network and your assigned FTP server. This is a
useful tool if you want to backup or restore configuration files. However, before
executing this command your FTP server parameters must be set up correctly using
the Firmware Updates command.
When you choose the Transfer System Files command, Manager/One presents you
with options to upload configuration files from their source on the network (either
cloud or device) to your FTP server, or download configuration files from your FTP
server to their source.
Figure 52. Transferring System Files
Select either Device Configuration File or Cloud Configuration File from the pull-
down list then click on the Download/Upload button to define the action you want
to initiate.
If you need to reset your FTP parameters, click on the FTP Server: button, otherwise
click on the Execute button. When asked to confirm the action, click on the OK
button to begin transferring files, or click on the Cancel button to abort the
command.