User's Manual Part 3

Access / One
®
Network
74 Managing the Network
5
If you are allowing access via Telnet or SSH, enter a value—in seconds—in
the Shell Timeout field to define how long the connection will remain open
during idle periods. Setting the shell timeout value to 0 (zero) will disable the
timer and keep the session open, even when idle.
◗ Web
Choose Clear & Secure to allow network management from your Web
browser via HTTP (clear) and HTTPS (secure), or choose Secure Only to
restrict management via a secure HTTPS connection only. Alternatively, you
can choose None to prevent all Web management access.
◗ CIMS (Cloud Infrastructure Management System)
Choose Clear & Secure to allow network management via CIMS, where
security levels are controlled automatically. Alternatively, you can define the
security level manually by choosing Secure Only or Clear Only.
◗ SNMP Management
Check this box to enable network management via an SNMP (Simple
Network Management Protocol) management console. Your Access/One
Network supports the 802.11 MIB (Management Information Base), as well as
Strix proprietary MIBs. Any MIB I or MIB II compliant SNMP management
console (such as CiscoWorks or HP OpenView) can be used to manage your
network remotely.
◗ FTP Server
Check this box to enable FTP server functionality (this box must be checked if
you want to update your firmware or transfer system configuration files).
After inputting data (or making selections), click on the Update button to update this
page, then click on the Apply Configuration tab to propagate your changes across
the network. If necessary, you can click on the factory default (FD) button in the
toolbar to reset all data on this page to its factory default state.