User's Manual Part 3

Access / One

Network

Managing the Network 97

Figure 75 shows an example of the Radio Parameters configuration page for radios

operating in the 4.940 GHz to 4.990 GHz wireless band.

Figure 75. Public Safety Radio Parameters (4.940 GHz to 4.990 GHz)

802.11a Radio Parameters at the Network Level

The following options are available with the Radio Parameters command for all

802.11a radios at the network level:

◗ 802.11a Radios Wireless Mode

This option is not configurable at the network level. If you want to set up the

wireless mode for a specific 802.11a wireless module, go to “Radio

Parameters” on page 147.

◗ Maximum 802.11a Clients

This option allows you to restrict the number of 802.11a clients that can

associate with each 802.11a access point. The default is 128. Setting this field

to 0 (zero) prevents all 802.11a client access.

◗ 802.11a Channel Selector

These options extend the range of 802.11a wireless capability by allowing

you to select 802.11a wireless channels. Check the corresponding box to

enable an 802.11a channel of your choice.