User's Manual Part 3

Access / One
®
Network
98 Managing the Network
5
802.11g Radio Parameters at the Network Level
The following options are available with the Radio Parameters command for all
802.11g radios at the network level:
◗ 802.11g Radios Wireless Mode
This option allows you to select the 802.11g wireless mode from the options
available in the corresponding pull-down list, including:
• 802.11g: This is the default standard 802.11g wireless mode.
• 802.11g Only (No 802.11b): This mode restricts the radio to the 802.11g
wireless mode only and does not allow 802.11b compatibility.
• 802.11b Only (No 802.11g): This mode restricts the radio to the 802.11b
wireless mode only and does not allow 802.11g compatibility.
◗ Maximum 802.11g Clients
This option allows you to restrict the number of 802.11g clients that can
associate with each 802.11g access point. The default is 128. Setting this field
to 0 (zero) prevents all 802.11g client access.
◗ 802.11g Channel Selector
These options extend the range of 802.11g wireless capability by allowing
you to select 802.11g wireless channels. Check the corresponding box to
enable an 802.11g channel of your choice.
◗ 802.11g (only)
These options allow you to set up how your 802.11g wireless modules
perform on the network (not applicable to 802.11a radios). Options that are
specific to 802.11g radios include: