User's Manual Part 3

Access / One
®
Network
Managing the Network 117
5
The inventory list allows you to manually add nodes, at your discretion. To add a
node to the inventory list, enter the node’s serial number in the Node ID field then
click on the Add button. Nodes that cannot be detected by the network will appear
in the Unreachable Devices frame.
You also have the option of manually deleting nodes from the inventory list. To
delete a node, simply click on the X icon next to the node you want to delete. The
system will then prompt you for a confirmation. Click on the OK button to delete the
selected node, or click on the Cancel button to cancel your request.
Figure 90. Deleting a Node from the Inventory List
Print Friendly Format
This option converts the inventory list into a printer friendly format that can be
printed on standard letter size paper. After converting the inventory list, the system
prompts you for your printer’s destination. To initiate the printing process, click on
the Print button.
Figure 91. Printing the Inventory List

The node’s alphanumeric serial number is case-sensitive, with all alpha
characters being upper case.