User's Manual Part 3

Access / One
®
Network
78 Managing the Network
5
TCP/IP Settings
This command allows you to specify whether Access/One will obtain the Default
Gateway and DNS IP addresses automatically, or use pre-configured static IP
addresses.
Figure 60. TCP/IP Settings
The following options are available with this command:
◗ Default Gateway
The system is set up to use DHCP (Dynamic Host Configuration Protocol) to
obtain the default gateway IP address automatically (default).

When using wireless uplinks between nodes, Access/One
Network’s self-tuning feature requires that a default gateway and/
or DNS is specified to determine delays to the host Ethernet.
When DHCP is used across the network (default), specifying
both of these will satisfy this requirement.