User's Manual Part 3

Access / One

Network

Managing the Network 79

◗ DNS Server

Choose whether you want the system to use DHCP to obtain the DNS IP

address automatically (default), or use a pre-configured static IP address. If

you choose the latter option, enter IP addresses for the primary and

secondary (if any) DNS server. DNS is used by your Access/One Network

modules to lookup the names of various servers (for example, the RADIUS

and FTP servers). You must specify a Domain Name when static IP addresses

are used. This has the effect of appending the Domain Name to non-fully

qualified address requests (for example, the FTP server host name configured

as FTP123 will become FTP123.yourdomain.com).

After inputting data (or making selections), click on the Update button to update this

page, then click on the Apply Configuration tab to propagate your changes across

the network. If necessary, you can click on the factory default (FD) button in the

toolbar to reset all data on this page to its factory default state.

Network Topology

This command allows you to define whether your Access/One Network will obtain

its Master Network Server IP address automatically or use a pre-configured static IP

address. It also provides you with the option of defining any static network servers.

Figure 61. Network Topology