User's Manual Part 4

Access / One
®
Network
134 Managing Modules
7
When you initiate a command at the module level, the configuration pages that are
displayed contain the configuration settings that are currently applied to the selected
module only (not the network or any other module).
The Manage Function
This function provides you with the tools you need to manage individual modules
and includes the following commands:
◗ Actions
• Factory Defaults
• Load Firmware/Configuration
• Page Device
• Reboot

In most cases, the only difference between a configuration window
generated at the network level and the same window generated at the
module level is the inclusion of pre-configured module data (if any) in
the fields contained within the window.