User's Manual Part 4

Access / One
®
Network
Managing Modules 141
7
Network Management
This command generates three sub-commands (General, SNMP, and Trusted IP
Addresses) that allow you to define parameters for how the module is managed
within your Access/One Network. For the most part, these commands are the same
as their corresponding commands at the network level (with some minor exceptions
that are documented here).
General
Unless you are logged in to a network server, this command is the same as its
corresponding command at the network level. In this case, go to “General” on
page 73 to configure all options under this command. If you are logged in to a
network server, the window generated by this command includes an additional
option called Client Connect Privacy Tags.
Figure 110. Client Connect Privacy Tags
◗ Client Connect Privacy Tags
Check the box for Preserve Tags on Egress to LAN if you want this module to
preserve any client connect privacy tags that have been assigned to your
Access/One Network. See also, “Client Connect” on page 101.