User's Manual Part 4

Access / One
®
Network
Managing Modules 145
7
Date and Time
This command is the same as its corresponding command at the network level. To
configure these options for the module, go to “Date and Time” on page 88.
When finished, click on the Update button to update this page and apply your
changes, then click on the Reboot button to reboot the module. If necessary, you
can click on the Refresh button in the toolbar to reset all parameters on this page to
their original values.
Operating Environment
This command is the same as its corresponding command at the network level. To
configure these options for the module, go to “Operating Environment” on page 91.
When finished, click on the Update button to update this page and apply your
changes, then click on the Reboot button to reboot the module. If necessary, you
can click on the Refresh button in the toolbar to reset all parameters on this page to
their original values.
Firmware Updates
This option is similar to the Firmware Updates command used at the network level,
but without the FTP Update Aggressiveness options, and with the addition of the File
Name field (for defining a new configuration file). For all other Firmware Updates
configuration options, go to “Firmware Updates” on page 91.
Figure 113. Setting Up the FTP Server (Module Level)