User's Manual Part 4

Access / One
®
Network
126 Managing the Network
5
Procedure
Configure a single remote network server for each subnet (NY: 192.162.1.22) on the
LA server. Within a few minutes, Strix’s mesh topology feature will cause all of the
remote subnets to automatically appear in each network server. Your Access/One
Network is now manageable from any of the network servers in the network.
Removing the NS to NS Feature
To remove the NS to NS communication feature, delete all of the remote server
entries on the LA server. When done, click on the Update button, then click on the
Apply Configuration tab and reboot the network (to apply your changes).
Managing Remote Subnets from Manager/One
In most cases, configuration of your Access/One Network will apply to all subnets to
maintain an homogeneous network. There are a few commands which can only be
applied at the subnet level. The following commands apply to the network level
only (regardless of what view is currently displayed):
◗ Load Firmware on Network
◗ The Apply Configuration Function
The following commands apply at the network or subnet level (depending on what
view is currently displayed):
◗ Reboot Network (network only)
◗ Reboot... (subnet / network)
The following commands are applicable only at the subnet level:
◗ Update Network Membership
◗ Update Node Names