User's Manual

Access / One
®
Network
The Manager/One Interface 51
4
The Tools pane provides two configurable options of how the logical view of your
Access/One Network is displayed. These are:
◗ Show Names
With this feature enabled, the main window displays the assigned names in
your Access/One Network of each node (under the relevant node).
Figure 35. Show Names
◗ Show Link Strengths
With this feature enabled, all wireless links will be coded according to the
legend shown in the Tools pane. For example, a wireless link with an RSSI
(Received Signal Strength Indicator) value of -70 dBm and above will appear
as a GREEN broken line between nodes. If the RSSI changes, the appearance
of the link in the logical view will also change. With this feature disabled, all
wireless links are displayed as GRAY broken lines. The RSSI is a measure of
the energy observed by an antenna when receiving a signal.
Figure 36. Show Link Strengths
Either or both of these options in the Tools pane can be enabled or disabled,
depending on your preference.
DisabledEnabled
DisabledEnabled