User's Manual

Access / One
®
Network
60 The Manager/One Interface
4
Commands
Manager/One provides many commands that you can initiate across the network or
apply to individual modules within a network node. Commands are accessed from
pull-down menus, and the content of these menus is determined by which tabbed
page you are viewing. The following graphic shows an example of Manager/One
commands that are available from the Configure tab at the network level.
Figure 44. Commands
When you choose a command from one of the pull-down menus, the content of
Manager/One’s main window is propagated with the selected command’s interface,
including configurable fields, check boxes, radio buttons, and other options that you
can apply to your network and/or modules. All commands are fully documented in
“Managing the Network” on page 65.
Commands