User's Manual

Access / One
®
Network
142 Managing Modules
7
When finished, click on the Update button to update this page and apply your
changes, then click on the Reboot button to reboot the module. If necessary, you
can click on the Refresh button in the toolbar to reset all parameters on this page to
their original values.
SNMP
The only difference between the SNMP configuration window generated at the
module level and the corresponding window at the network level is the addition of
the Description and Name identifier fields, specific to the module. For all other
SNMP configuration options, go to “SNMP” on page 75.
Figure 111. Module Description and Name
The Description field provides a description of the module and is not editable. If
desired, you can enter a new name for the module in the Name field.
When finished, click on the Update button to update this page and apply your
changes, then click on the Reboot button to reboot the module. If necessary, you
can click on the Refresh button in the toolbar to reset all parameters on this page to
their original values.