User's Manual

Access / One
®
Network
128 Managing Subnets and Nodes
6
Interface Features in the Subnet View
The interface features that are unique to the subnet view have already been
discussed in Chapter 4, The Manager/One Interface. They are listed here for your
convenience, and include:
◗ “A Choice of Layouts” on page 45.
◗ “The Details Pane” on page 56.
◗ “Inventory or Auto Discovered” on page 63.
The Manage Function
To avoid repetition, this section only addresses the management commands at the
subnet and node levels that are different from the equivalent commands at the
network level, or management commands that are unique to the subnet and node
levels. Therefore, the section headings included here are limited to the following
commands in the Manage function only:
◗ Commands (at the Subnet Level)
• Load Firmware...
– Subnet
– Network
• Reboot...
– Subnet
– Network
◗ Commands (at the Node Level)
• Update Node Names
• Update Network Membership
All other commands that are available at the subnet level but not listed here can be
found in Chapter 5, Managing the Network. You can also find them in the Table of
Contents and the Index.