User's Manual

Access / One
®
Network
76 Managing the Network
5
The following options are available with this command:
◗ SNMP Communities
Enter your GET Community (read), SET Community (write) and TRAP
Community in the corresponding fields. The defaults for these fields are:
• GET Community: public
• SET Community: netman
• TRAP Community: public
◗ SNMP System
Enter the Contact and Location information for the person managing your
Access/One Network.
◗ SNMP Trap Managers
Enter a valid IP address for any SNMP Trap Manager you intend to use. The
SNMP Trap Manager you choose must be enabled, so ensure that the
appropriate box is checked. If you have multiple SNMP Trap Managers
assigned, you can delete a manager by clicking on the X icon associated with
each manager.
◗ Traps
Choose Open to expand the primary
elements of the SNMP Trap Manager tree.
From here you can make management
selections by checking (or unchecking)
the appropriate check boxes. When
finished making your selections, choose
Close to collapse the tree.
After inputting data (or making selections), click
on the Update button to update this page, then
click on the Apply Configuration tab to
propagate your changes across the network. If
necessary, you can click on the factory default
(FD) button in the toolbar to reset all data on this
page to its factory default state.
Figure 58. Managing Traps