User's Manual Part 3

Access / One
®
Network
92 Managing the Network
5
Wi-Fi
This area of Manager/One contains the primary configuration commands for your
Access/One Network in the Wi-Fi environment. Any commands executed here are
applied to all wireless modules, so make sure the changes you initiate are changes
that you want to apply to the entire network, otherwise go to “Managing Subnets
and Nodes” on page 127 or “Managing Modules” on page 133.
General
This command allows you to define your Access/One Network’s general radio
parameters for 4.9 GHz Public safety, 802.11a and 802.11g radios. These radio
parameters are applied across the entire network. If you want to set up the radio
parameters for a specific wireless module, go to “Radio Parameters” on page 147.
Figure 72. Setting Up General Radio Parameters