User's Manual Part 4

Access / One
®
Network
124 Managing the Network
5
The Apply Configuration Function
This function is used to apply any configuration changes that have been made at
either the network or subnet level. When BLUE, click on this tab to propagate and
apply your changes to all nodes and wireless modules within your Access/One
Network or a specific subnet.
Figure 100. Apply Configuration
Important Notes About Apply Configuration
The following notes are important considerations when using the Apply
Configuration function.

For changes to be applied at the network or subnet level, you must
reboot the network after clicking on the Apply Configuration tab,
otherwise your changes will not be implemented.

The Apply Configuration function is not available when configuring
individual modules, because configuration changes at the module level
are applied automatically when you click on the Update button.
Apply Configuration