User's Manual Part 4

Access / One
®
Network
Managing Modules 147
7
Radio Parameters
This command is similar to the Radio Parameters command used at the network
level, but with fields that are relevant only to the selected wireless module. To avoid
confusion, the page generated by this command will be documented here in full. All
changes made to this page will be applied only to the module you are currently
logged in to (not to the entire network).
Figure 115 shows an example of the Radio Parameters configuration page for
802.11a radios operating in the 5.745 GHz to 5.825 GHz wireless band.
Figure 115. 802.11a Radio Parameters (5.745 GHz to 5.825 GHz)