User's Manual Part 4

Access / One
®
Network
Managing Modules 157
7
When finished, click on the Update button to update this page and apply your
changes, then click on the Reboot button to reboot the module. If necessary, you
can click on the Refresh button in the toolbar to reset all parameters on this page to
their original values.
Rogue Scan
This option allows you to define which channels are scanned for rogue devices by
the defined country code (similar to its corresponding command at the network
level, but without the option for defining a rogue list refresh period). To configure
rogue scan channel selections for the module, go to “Rogue Scan” on page 114.
When finished, click on the Update button to update this page and apply your
changes, then click on the Reboot button to reboot the module. If necessary, you
can click on the Refresh button in the toolbar to reset all parameters on this page to
their original values.