User's Manual Part 6

OWS Field Installation 19
OWS Field Installation
Mounting an Omni Antenna on a Pole
Parts Required
◗ Pole.
◗ Omni antenna.
◗ 2 U-bolt assemblies, for mounting the antenna to a standard 1 7/8 inch diameter steel pole.
◗ Mounting bracket.
◗ Antenna cable.
Tools Required
◗ 1/2 inch nut wrench ◗ 7/8 inch nut wrench
1. Attach the omni antenna to the
mounting bracket, using the
washer and locknut provided.
The U-bolts are pre-assembled
with the mounting bracket.
2. Use a 7/8 inch nut wrench to
tighten the locknut to 10–12 lbf.ft
(1.38–1.66 kgf.m).
U-Bolt Assembly (x2)
Omni Antenna
Mounting Bracket
Includes:
◗ U-bolt
◗ Plain washers (2)
◗ Spring washers (2)
◗ Nuts (2)
Locknut
Washer