print in Pantone 295C
Always read the safety instructions carefully Keep this User's Manual for future reference Keep this equipment away from humidity Lay this equipment on a reliable flat surface before setting it up. Do not stand it on soft furnishings. If any of the following situation arises, get the equipment checked by a service technician: The equipment has been exposed to moisture. The equipment has been dropped and damaged. The equipment has obvious sign of breakage.
Table of Contents Introduction ................................................................................... 1 Front and Rear Panel...................................................................... 2 Remote Controll... ......................................................................... 3 Connections...................................................................................5 First Time Installation.....................................................................
PRIMA is a Free-To-Air digital terrestrial receiver, allowing you to access free-to-air digital terrestrial TV channels and radio broadcasts on your TV set. Its digital reception covers VHF & UHF band. Compared with the analog TV programs, digital TV programs eliminate the noise and interference but offer high quality video and audio. An on-screen initial installation guide is provided so that you can easily start to enjoy watching the programs.
2. Front Panel and Rear Panel Illustration 2.1 Front panel 1 2 3 4 POWER BUTTON: Used to turn on/off the main power supply. REMOTE CONTROL SENSOR: Used to receive the signal from the remote control. STANDBY INDICATOR: Used to visually show power state of the receiver, the green LED will be light if turned on the receiver and the red LED will be light if the receiver entered standby mode. CHANNEL UP/DOWN: Used to change channels without using the remote control. 2.
Remote Key Function: 1. DTV/VCR To switch between the VCR SCART input and the DTV output mode. To display information about the channel being viewed or further information about the program when in small EPG screen. 3. PAUSE To pause the program being viewed . 4. EPG To display information about the program being viewed and what's on next. 5. EXIT To return to the previous screen or menu. 6. Ok To confirm a selection within a menu. 7.
2.3 Installing the Batteries Remove the battery cover from the remote control and put 2XAAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries. 1.Open the cover O PE 2.Install batteries 3.Close the cover N O PE N 2.4 Using the Remote Control To use the remote control, point it towards the front of the digital receiver The remote control has a range of up to 7 metres from the receiver at an angle of up to 60 degrees.
Caution: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To prevent the risk of electric shock, do not open the cover or the back of the receiver. 3.1 Connecting to a TV Set TV 5 English 3.
3.2 Connecting to TV and VCR TV VCR Note: When connecting the receiver to other equipment, e.g., TV, VCR and amplifier, make sure to refer to relevant user manual for instruction. Also, make sure you disconnect all the equipments from the mains supply before the connection.
After all the connections have been made properly, switch on your TV. Make sure the receiver is connected to the mains and press Power to switch the receiver on. If you are using the receiver for the first time, a First Time Installation menu will be displayed to guide you through the initial setup. Use the remote controller to finish the setup. 1. Enter your regional settings, include your Region, OSD Language, Time Zone and Antenna Power. Then select NEXT to proceed.
2. Select Yes to start the automatic channel search. First Time Installation (2) Do you want to start Auto Search? Previous channel list will be replaced. YES BACK NO 3. Wait to complete the scanning. In case you want to stop the scanning, press the EXIT key. The channels already found will still be stored. Automatic Search Progress 30% Channel No 33 Frequency TV List : TTV-1 TTV-2 HAKKA 587.0 MHz 013 Music List : G-Guide RAIL WAY 002 4.
5.1 Switching On and Off Whenever you are not using the receiver for a long time, press the button on the front of receiver. It will switch MAIN power totally OFF. For daily us, you can just us the Standby key on remote control to put it into standby mode. 5.2 Changing Channels To switch between different channels, you can: Press OK to display the channel list and UP/DOWN to select a desired TV Program List channel. No.
5.4 Watching Favorite List You can press FAVORITE to watch your preset favorite channels. To create your favorite list, go to Main Menu > Program List. Refer to Creating Favorite Channel Groups on page 13 for detailed information. 5.5 Displaying information To display the detailed information of the current channel, press the INFO key.
To view the EPG (electronic program guide) provided by the content provider: 1. Press the EPG key and then use the Up / Down key highlight a desired channel to preview the EPG. To view today's complete EPG, press the Right key. TV Program List No. 1 2 3 4 5 6 7 8 Program Name DIMO FTV FMTV FTVN TTV-1 TTV-2 HAKKA CTS 2006/06/23 15:36 News 05:00-07:00 Beaches 10 Best 07:00-08:00 2. When today's complete EPG is displayed, use the Up / Down key to scroll along the EPG.
4. To exit the detailed EPG screen, press the Left key. 5.9 Displaying Text Press the TEXT key to open a teletext page (if teletext is transmitted). Press TEXT key again to close it. 5.10 Selecting Sound Mode To switch the sound mode between LL (left), RR (right) and LR (stereo), press the Audio key.
6.1 Managing Program List Main Menu > Program List > TV / Radio Program List All active channels are listed in the Program List, allowing you to make your own favorite channel group, move, delete or sort channels. 6.2 Creating Favorite Channel Groups This feature allows you to group your favorite channels. To create your favorite groups: 1. Select the channel which you would like to add to the group and go to the Favor column. 2.
6.3 Moving a Channel 1. Select the channel which you like to move and go to the Move column. 2. Press OK and on symbol will be displayed. 3. Use the Up / Down key to move the channel to a desired position. Program edit table No. 1 2 3 4 5 6 7 8 9 10 Program Name DIMO FTV FMTV FTVN TTV-1 TTV-2 HAKKA CTS CTS-IQ CTS-EQ Favor Move Del 6.4 Deleting a Channel 1. Select the channel which you like to delete and go to the Del column. 2. Press OK and an X symbol will be displayed.
Sort By Name By Service ID By Channel No. 3. Press MENU or EXIT to return the program list. The list is now sorted by the specified order. 6.6 Program Search Automatic Search 1. Enter the Automatic Search menu via Main Menu > Program Search > Automatic Search. 2. Select OK to start auto search. Warning Do you want to start Auto Search? OK Cancel 3. Select whether to erase your previous channel list as required. Warning Do you want to erase your previous channel list? YES NO 15 English 6.
4. Wait to complete the scanning. In case you want to stop the scanning, press the EXIT key. The channels already found will still be stored. Automatic Search Progress 30% Channel No 33 Frequency 587.0 MHz TV List : TTV-1 TTV-2 HAKKA 013 Music List : G-Guide RAIL WAY 002 5. When finished, the last found channel will be played. 6.7 Manual Search If any channel is missing after auto search, or you want to add newly launched channels, you can use Manual Search to scan the desired channels.
Enter Parental PIN Enter PIN OK 2. After correct PIN input, the following options are provided: Parental Control Channel Lock Parental Setting Change PIN Channel Lock: Allows you to activate or de-activate the overall parental control. When set to YES, all the channels with locking settings will be locked. YES NO Parental Setting: In the channel list, select the channel you want to lock and then press OK. A padlock symbol will be displayed. To remove the lock, press OK again. Parental Setting No.
Change PIN: Allows you to change the PIN. A PIN can be composed of 1 to 4 digits. To change the PIN, enter the old, new PIN in the provided fields. After pressing OK, a message indicating PIN Code Changed will appear. Change Parental PIN Old PIN New PIN Confirm New PIN OK Note: To activate the parental control feature, Channel Lock must be set to YES. If you want to lock particular channels while keeping other channels unlocked, use Parental Setting table to make the settings. 6.
This option allows you to select your TV system among PAL, NTSC and Auto. TV Standard PAL NTSC AUTO 7.2 Display Type This option allows you to select the aspect ratio of the video output. If you are using normal 4:3 TV, it is OK to view the regular 4:3 content being broadcasted. But occasionally broadcasters transmit widescreen content; in this situation, you can choose how to display it in a conventional TV set. 4:3 LB (Letterbox) For conventional 4:3 TV.
Display Type 4:3 PS 4:3 LB 16:9 7.3 Video Output Set the video mode as CVBS or RGB. Video Output CVBS RGB 7.4 Antenna Power The default setting is OFF. Set this option to ON if this receiver box is connected to an external active antenna that amplifies the received signal. This receiver box can supply 5V DC at 50mA maximum. Caution: If you are using a normal passive antenna, make sure to set this setting to OFF . Antenna Power OFF ON 7.
England English OSD Language CMT+00:00 Time Zone 7.6 Language OSD Language: Select the on-screen-display language as required. 1 st /2nd Audio Language: This option allows you to select your first and second choice for the audio language. If neither of your selected language is available on the program transmitted, the main language of the program will be used. You can alternatively press the AUDIO key to use another available language. Subtitle Language: Allows you to select the subtitle language.
7.8 System Schedule This feature allows the receiver to automatically switch on and tune to a pre-specified channel for a pre-set length of time. You can use this feature to schedule recording if your receiver is connected to a VCR or recorder or as reminders of certain programs. Up to 10 tasks can be scheduled. 1. In the Schedule pane, use the Up / Down key to select a task and use Right / Left key to switch between Inactive and Active. 2. Press OK to enter the Detail pane. 3.
7.11 Factory Default This option allows you to resume factory defaults. 1. To reset defaults, select OK. Factory Default NO YES Warning Do you want to set factory default? Cancel OK 2. All programs you have searched will be erased and all parameters, e.g., the regional settings, languages and favorite lists, will return to the factory default. 3. After restoring defaults, a First Time Installation screen appears asking if you would like to conduct an automatic scan search. 7.
7.13 Personal Style This option allows you to customize the menu settings. You can set the Menu Color, Transparency level, Border Pattern and Entry Animation as preferred.
If you experience problems with this receiver or its installation, in the first instance please read carefully the relevant sections of this User Manual and this Troubleshooting section. 25 English 8.
26
English
