LED TV with DVB-T2/C/S2 SRT 32HB4003 SRT 40FB4003 User Manual Bedienungsanleitung Manuel utilisateur Manuale utente Manual do Utilizador Инструкции за употреба Руководство пользователя Посібник користувача Användar Manual Uživatelská příručka Navodila za uporabo Korisnički priručnik Uputsvo za rukovanje Používateľská príručka Használati útmutató Käyttöohje Brukermanual Manual del Usuario Gebruiksaanwijzing Brugervejledning Manual de Utilizare Instrukcja obsługi
www.strong.tv Supplied by STRONG Austria Represented by STRONG Ges.m.b.H. Teinfaltstraße 8/4.Stock 1010 Vienna, Austria Email: support_at@strong.
English Licenses THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference. TABLE OF CONTENTS 1.0 INSTRUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Accessories 1.4 Equipment set-up 3 3 4 4 4 2.0 INSTALLATION 2.1 Default PIN code: 0000 2.2 Front panel/underside 2.3 Rear panel 2.4 Side panel 2.5 Remote control 2.6 Installing the batteries 2.7 Using the remote control 5 5 5 5 5 6 7 8 3.0 FIRST TIME INSTALLATION 3.1 DVB-S/S2 installation 3.
English 1.0 INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus.
WEEE Directive Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
English 2.0 INSTALLATION 2.1 Default PIN code: 0000 2.2 Front panel/underside Fig. 2 NOTE: 1. 2. 3. 4. The graphics are for representation only. Power indicator /remote sensor Speakers Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON. Power switch ON/OFF 2.3 Rear panel NOTE: The graphics are for representation only. 2.3.1 32 inch Fig. 3a 1. VIDEO/AUDIO L/R Connect AUDIO and VIDEO input signals from a signal source such as DVD. 2.
2.4.1 32 inch Fig. 3c 1. HDMI 1 (ARC) 2. 3. 4. 5. 6. 7. Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console or directly to a Digital Amplifier that supports the ARC function. This input is equipped with the ARC (Audio Return Channel) feature to implement audio connections and for a full Dolby audio support. SAT IN Connect a satellite dish to the TV for searching programmes.
Press this button to superimpose the teletext over the TV programme. Press again to return to normal teletext mode. 14. HOLD Press to hold the teletext page on screen without update and changes. Press again to release the hold state. 15. (REVEAL) TIP In teletext mode, press to reveal the hidden information. 16. INDEX Press this button to display index page. 17. (SUB.PAGE) SUB.P Press this button to enter or exit subpage mode (if subpage is available}. Press the t u buttons to select a subpage. 18.
Precautions for using the battery Improper using of the battery will cause leakage. Carefully follow these instructions. 1. Please note the batteries' polarity to avoid short circuit. 2. When the battery's voltage is insufficient which affect the use range, you should replace it with a new battery. Remove the batteries from the remote control unit if you do not intend to use it for a long time. 3. Do not use different types of batteries (for example Manganese and Alkaline batteries) together. 4.
Select FTA Channels to search Free-To-Air channels only or All Channels to search FTA and Encrypted channels Service Type Select DTV to search DTV channels only, RADIO to search radio channels only or All for a complete search. English Crypted It is recommended to use the default settings. 3.2 DVB-T/T2 installation Terrestrial Setting First select the Tune Type by pressing t u to select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and ATV to search analogue broadcasts). Press q to continue.
5.0 MENU SETTINGS Below items depend if they are available of select input source. Use INPUT to select another source. 5.1 Menu control (DTV mode) Press MENU to enter the main menu. Press t u to select an item. Press pq and OK to select the submenus. Press MENU to exit the item. 5.2 Picture menu Picture Mode Select the automatic picture control mode. Available choices are Dynamic, Standard, Mild and User. Colour Temperature Select the overall colour tone of the picture.
Detect and reduce moderate video noise. High Detect and reduce enhanced video noise. Default Set as Default. English Middle 5.3 Sound menu Sound Mode Select your favourite sound mode for each input. Choices are Standard, Music, Movie, Sports and User. Bass Adjusts the lower frequency of the sound. Treble Adjusts the higher frequency of the sound. Balance Control the sound balance between the right and left loudspeaker (earphone).
5.4.4 ATV Manual Tuning (in DVB-C mode only) First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and press OK to access. Highlight and press pq to select Storage To 1 (maybe other number), Sound System and Channel No.. Then select search and press OK to start the search. Press u for the unit to search towards higher frequency. Press t for the unit to search towards lower frequency.
Time Zone Press p q t u to select Time Zone. Sleep Timer Press p q to select Sleep Timer. Available Options: Off, 10 min., 20 min., 30 min., 60 min., 90min., 120 min.,180 min. and 240 min.. Auto Standby This function allows you to set the automatic shutdown of your TV. Choose between 2H, 3H, 4H or Off to disable this function. OSD Timer This function allows you to choose how long the info banner is displayed. Choose between 5s, 15s or 30s.
5.7.1 HDMI CEC CEC Control Press t u to turn the HDMI CEC On or Off. Audio Receiver Press t u to turn the Audio Receiver On or Off. Device Auto Power Off Press t u to turn on this feature. When finished turn off your TV. The connected device will turn off automatically. TV Auto Power On Press t u to select this option. When finished, turn on the connected device. The TV will switch on automatically. Device List Press OK to open the main menu of device. Device Menu Access the device menu. 6.
By choosing one of the three media types, for example Movie, the folders inside will display only video files and no other formats. English NOTE: 6.2.1 Play movies Fig. 6 During playback, press INFO or OK to display/exit the menu bar (Fig. 6). Press the USB control buttons on the remote control to do relevant operations. Play & Pause/Stop/Prev./Next Press u 2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to play the previous or the next video file.
NOTE: If one (or more) file(s) of the play list is selected, the buttons 7 8 will play only selected files. This menu only shows supported files. Files with other file extensions are not displayed, even if they are saved on the same USB storage device. An over-modulated mp3 file may cause some sound distortion during playback. This TV supports lyrics display (in English). The maximum number of characters per line is 48.
From time to time you can check if there is an improved software version available. This can be viewed and downloaded from our website www.strong.tv. Search the model number on our website's service support section. If there is an improved software version you can download the file and copy it to the root of a USB device. Then press pq button to select Software Update (USB) from the SETUP menu on your TV. Afterwards plug your USB device into the USB slot and press OK to update the respective software.
Problem Possible cause and solution Playback of video is Read/write speed of your USB device could be too low. Make sure to use causing picture freeze/ a USB storage device with sufficient speed and space. Pen drives (USB macro blocks or similar sticks) may not support sufficient speed. distortion, especially on HD content. No signal or weak signal, a) Cables might have loosened; moisture might have entered into intermittent reception. cables or connectors, heavy rain at present or heavy storm at present.
English 1x S/PDIF (coax.) 1x USB 1x HEADPHONES Connectors 40 inch 1x ANT/CABLE IN 1x SAT IN 1x SCART 1x CI+ 2x HDMI 1x S/PDIF (coax.) 1x AV IN 1x USB 1x VGA 1x HEADPHONES General Data Operating voltage: Power consumption: Power consumption in standby: Operating temperature: Storage temperature: Operating humidity: Storage humidity: Dimensions (WxHxD) in mm: Net-weight: 100 ~ 240 V AC 50/60 Hz 32” max. 60 W, typ. 35 W 40”: max. 72 W, typ. 52 W 32”, 40”: <0.
