Operation Manual

PART 1 • English

English

Symptom Remedy

Electronic Program Guide (EPG)

EPG empty The selected program does not support EPG. The local time is

incorrect. Set the correct local time

Audio & video issues

TV Picture changes

colour

This may happen after a power-cut or disconnection from the power

source. Your receiver has lost some software settings. Switch off your

receiver and on again after a few seconds. If the problem persists,

contact your vendor

Blocks in the TV picture The signal is too weak or defective due to e.g. bad weather conditions.

Try to adjust your aerial position or wait for the signal to be re-

established