Picture similar Digital Terrestrial Receiver SRT 5200/SRT 5202/SRT5205 User manual
PART 1 • English 1.0 Instruction 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Features & Accessories 2 2 3 4 4 2.0 Connection 2.1 Connecting to TV and Terrestrial Antenna 2.2 Connecting to TV and VCR 2.3 Connecting to a Digital Audio Amplifier 2.4 Connecting to RCA (Audio L/R, Video) 5 5 5 5 5 3.0 Your Receiver 3.1 Front Panel 3.2 Rear Panel 3.3 Remote Control 3.4 Default password: 0000 5 5 6 6 7 4.0 First Time Installation 7 5.0 Main Menu 5.1 Channel 5.2 Installation 5.3 Setup 5.
PART 1 • English 1.0 Instruction 1.1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons.
GENERAL PRECAUTIONS - SAFETY PRECAUTIONS Lightning - If a lightning storm occurs while using a specified AC adapter, remove it from the wall outlet immediately. To avoid damage from unexpected power surges, always unplug the AC adapter from the power outlet and disconnect it from the receiver when the receiver is not in use. Overloading - Never overload wall outlets, extension cords, power strips, or other power connection points with too many plugs.
PART 1 • English When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its accessories. Failing to comply with such packaging procedures could void your warranty. 1.3 Equipment Set-up We recommend you consult a professional installer to set up your equipment. Otherwise, please follow these instructions carefully: n Refer to the user manual of your TV and your antenna.
PART 1 • English User-friendly Remote Control NTSC/PAL converting automatically and manually 3 Games (Tetris, Snake, Othello) Digital sound through coaxial output (S/PDIF) by connecting to digital amplifier n DVB-T compliant, UHF/VHF Tuner with Loop-through function n Support of active antenna by 5 V output n Power saving automatic standby function English n n n n * Depending on local signal conditions; ** Availability depending on broadcaster Accessories: n 1 User Manual n 1 Remote control unit n 2x Ba
PART 1 • English 3.2 Rear Panel Fig. 4 1. ANT IN To connect an antenna for reception of broadcasting signal. 2. TO TV To connect a TV set or to connect an extra receiver. 3. S/PDIF (Coax.) To connect your receiver to digital audio amplifier. 4. USB* Connects to USB device * USB connector of SRT 5205 on the front 5. TV SCART To connect your receiver with your TV set using a SCART cable. 6. VCR SCART* To connect your receiver with your VCR using a SCART cable.
PART 1 • English English 22. SUBTITLE Shows list of subtitled languages 23. tt uu Fast forward/rewind of video files 24. Coloured buttons For Teletext and other functions 3.4 Default password: 0000 4.0 First Time Installation If you use the receiver for the first time, the “Easy Install” menu appears. Use pq to select Region, OSD Language, Antenna Power and Scan Mode and tu to select options. Then use the pq buttons to move focus to Search and press OK to proceed with the automatic channel scan. 5.
PART 1 • English n Lock: To Lock channel or all channels press button [2], with tu select Yes in the confirmation window and press OK to save. Selected channel/s will get marked with the symbol. n Skip: To Skip channel or all channels press button [3], with tu select Yes in the confirmation window and press OK to save. Selected channel/s will get marked with the and will be skipped during channel zapping in full screen mode.
PART 1 • English Use this menu to delete all channels. Select Delete All with the pq and press OK, then enter the Password (default: 0000). In the confirmation window select Yes with tu and press OK to delete or select No to cancel. 5.1.5 Group Rename In this menu you can change favourite group name. Use the pq buttons to select Group Rename and press OK to enter. 1. With the pq buttons select a group and press OK. 2.
PART 1 • English 5.2.4 LCN Mode If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. You can activate/deactivate the LCN function by setting the "LCN Mode" to ON/OFF. 5.3 Setup This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. 1. Press pq buttons to highlight desired menu and press OK button to enter the setting menus.
PART 1 • English 5.3.5 Timer Setting English In this menu you can set a programme timer or sleep timer. Programme timer Timer Number: You can set 8 timers Timer Mode: Off/Once/Daily/Weekly/Monthly Timer Service: TV Service/Radio Service Wake-up Channel: You can select a desired channel as wake-up channel. Month/Date/Day: Press pq buttons to select your desired month, date and day. Time: Press OK to input the time with the numeric buttons.
PART 1 • English 5.4 Tools Press MENU button to enter main menu. Select “Tools” and press OK button to enter tools menu. 1. Press pq buttons to highlight the desired menu and press OK button to enter. 2. Press EXIT button to exit. 5.4.1 Receiver Information This menu displays some Receiver information like Hardware, Software, Signature and Remote Control and our Web site www.strong.tv. 1. In Tools menu, select “Receiver Information” and press OK button to open receiver information window. 2.
press OK to start. Message will be displayed to confirm update process, select “Yes” to confirm or “No” to cancel. 4. Press EXIT button to exit. Warning: After an update the receiver restarts automatically! During this process NEVER disconnect the receiver from the main or switch power OFF! This can damage your receiver and warranty will void! Note: This receiver has foreseen an over the air update function, which might not be available at your local broadcast conditions.
PART 1 • English 3. Selected by on-screen channels list You can also select the required channel directly from on-screen channel list. This is displayed using the receiver’s main menu. See chapter 5.1.1 TV Channel list in this manual for operation detail. Alternatively you can call up channel list by pressing OK in viewing mode. 4. Selected by EPG You can also select the required channel directly from electronic programme guide (EPG). This is displayed by pressing EPG button on remote control.
Problem No response to remote control Possible cause Receiver off Handset not aimed correctly Front panel obstructed Hand set batteries exhausted What to do Plug in and turn on plug Aim handset at front panel Check for obstructions Replace handset batteries Forgotten channel lock code Re-install channels to cancel channel lock Contact local Service Hotline or Forgotten menu lock code send email to our Support via www.strong.
PART 1 • English General Data Supply Voltage: 220 ~ 240 V AC (SMPS), 50/60 Hz Power Consumption: 8 W (max) SRT 5200: 3.80 W (typ.) SRT 5202: 3.90 W (typ.) SRT 5205: 4.40 W (typ.) Power consumption in Standby: SRT 5200: 0.80 W SRT 5202: 0.95 W SRT 5205: 1.20 W Operating Temperature: 0 ~ +40 °C Storage Temperature: -30 ~ +80 °C Operating Humidity Range: 10 ~ 85 %, RH, Non-condensing Size (W x D x H) in mm: 180 x 135 x 43 Net-weight: ca. 0.