User manual

ManualsBrandsStrong ManualsTV set-top boxesSRT 5216

PART 1 • English

Record

There are 3 different ways to record programmes: Instant recording, recording from EPG and recording via timer

Instant recording

In viewing mode press 4 to instantly start a record on the current channel.

Press 3 to stop recording. If you press 4 again, you can adjust the duration for this record. Insert the time with the numeric

buttons and press OK to conﬁrm, then press EXIT to remove the message.

From EPG

Press the EPG button to enter the programme guide, than select an event and channel with the buttons described on screen.

Press 4 on an event to plan a timer on this event. An icon is then displayed beside the planned event. If you want to remove

the planned record you have to press 4 again.

Manual scheduling

You can set a record manually via the Timer menu. For details refer to chapter 5.3.4 Timer Setting.

Note: In case the available free space on the USB device is not enough, recording operation of broadcast will

stop. Maximum available Time shift setting is 1h. Available record types: TS: Transport stream including

teletext, subtitles etc. PS: Program stream for playback by PC or another device.

With SRT 5216 you can record a channel while watching another within the same frequency.

WARNING: Please consider that Time shift needs min. 0,58 GB free space on the USB device and an accurate Time

shift function is depending on the speed of the used USB device.

5.5.5 Safely Remove Storage Device

In “Media+” menu, select “Safely Remove Storage Device” and press OK to safely remove the USB device. Then a message

is displayed.

5.5.6 Disk Format

1. In “Media+” menu, select Disk Format and press OK to enter this menu.

You will see actual used Device and Partition displayed, furthermore the available Capability in GB is shown.

2. Press pq to select File System and use tu to change between FAT/NTFS settings.

6.0 OPERATION

6.1 Changing Channels

There are 4 ways of channel selection - stepping through the channel list, selection by number, from the on-screen channel

list, and using the electronic programme guide (EPG).

1. Stepping through the channel list

To move through the channel list, press the pq buttons on the remote control.

2. Selected by number

Enter the channel number directly by pressing numeric buttons, and press the OK button to select desired

channel.

3. Selected by on-screen channels list

You can also select the required channel directly from on-screen channel list. This is displayed using the

receiver’s main menu. See chapter 5.1.1 TV Channel list in this manual for operation detail. Alternatively you

can call up channel list by pressing OK in viewing mode.

4. Selected by EPG

You can also select the required channel directly from electronic programme guide (EPG). This is displayed by

pressing EPG button on remote control. See in the below chapter of this manual for operation detail.

6.2 Accessing the Electronic Program Guide (EPG)

1. Press EPG button to enter EPG menu.

2. Press numeric button [2] to switch between channel list, events schedule of the selected channel and now/next

events.

3. In the event schedule, press OK button to book the selected event, press numeric button [3] to open the Detail

menu for the selected event.

4. Press numeric button [1] to open the Booking list menu.