User manual

PART 1 • English
3
English
Safety Check — Upon completion of servicing or repairs, ask the service technician to perform safety checks to determine
that the product is in good working order.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on
the apparatus.
Where the mains plug or all — pole mains switch is used as the disconnect device, the disconnect device shall remain
readily operable.
Remote control transmits a directional infrared beam. Ensure to aim the remote control directly at the infrared sensor of the
unit during operation. If the sensor has been covered or there is a large object between the RCU and sensor or it is exposed to
direct sunlight or a strong artificial light (fluorescent or strobe light) the sensor may not be able to receive the remote signal.
In this case, change the direction of the light or reposition the unit.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and
moisture. When unpacking it, make sure that all the parts are included and keep the packaging away from children.
When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the
receiver in its original packaging with its accessories. Failing to comply with such packaging procedures could void your warranty.
1.3 Equipment Set-up
We recommend you consult a professional installer to set up your equipment. Otherwise, please follow these instructions
carefully:
n Refer to the user manual of your TV and your antenna.
n Make sure that the SCART cable and outdoor components of the antenna are in a good condition and the SCART
connections are well shielded.
This manual provides complete instructions for installing and using this receiver.
The following symbols will serve as follow.
WARNING Indicates warning information.
Tips Indicates any other additional important or helpful information.
MENU Represents a button on the remote control. (Bold Character)
Move to Represents a menu item within a window. (Italic Character)
1.4 Accessories
n 1 User Manual
n 1 Remote control unit
n 2x Batteries (AAA type)
Note: The batteries should not be recharged, disassembled, electrically short-circuited or be mixed or used
with other types of batteries. If rechargeable accumulators instead of batteries are going to be used, we
recommend using (e.g. NiMH) types with low self-discharge to ensure long time operation of remote
control.
2.0 YOUR RECEIVER
2.1 PIN-CODE DEFAULT: 0000
2.2 Front Panel
Fig. 1
1. Power ON/STANDBY button
In case RED light is shown it indicates that the receiver is in STAND-BY mode, in OPERATING mode there
is no light shown.
2. 4 digits display
Indicates current channel number in OPERATING mode
3. USB
Connector for USB devices