Specifications

PART 1 • English

English

n Power on with last viewed channel

n User-friendly remote control

n NTSC/PAL converting automatically and manually

n 3 Games (Tetris, Snake, Othello)

n Support of active antenna by 5 V output

* Depending on local signal conditions

** Availability depending on broadcaster

*** STRONG cannot guarantee the playback of external video ﬁles, which have not been recorded by this device

Accessories:

n 1 User Manual

n 1 Remote control unit with 1 Battery (coin cell 3 V)

n 1 Infrared eye

n 1 Power adapter

Note: The batteries should not be recharged, disassembled, electrically short-

circuited or be mixed or used with other types of batteries.

If rechargeable accumulators instead of batteries are going to be used, we

recommend using (e.g. NiMH) types with low self-discharge to ensure

long time operation of remote control.

2.0 CONNECTION

Connecting to TV, Terrestrial Antenna, IR Eye and Main Power Fig. 1

To receive the broadcast signal, the terrestrial antenna cable should be connected to

the ANT IN connector at the receiver. Then connect the IR connector into the receiver

and make sure it is properly connected to the IR sensor input. Afterwards you can plug

the power adapter to the main power source. After all connections are established

carefully, the IR eye LED must light, otherwise the Remote Control will not react.

Connecting to TV and VCR

Fig. 2

Connecting to DVD Recorder Fig. 3

Connecting to a Projector Fig. 4

Connecting to a Hi-Fi device Fig. 5

3.0 YOUR RECEIVER

Fig. 6

1. SCART PORT To connect to your TV set.

2. SD Card reader To insert your SD card.

3. ANT IN To connect an antenna for reception of broadcasting signal

(support antenna power 5 V DC).

4. IR Sensor slot To connect IR eye plug

5. DC IN To connect the power adapter plug (5 V DC/1 A).