Specifications

PART 1 • English
6
3.1 Remote Control
1. Turns the receiver On/Standby
2. 0~9 Channel selection or value input
3.
Mutes audio output of the receiver
4. RECALL Back to previous shown channel
5. PAGE+/PAGE- Page up/down
6. VOL+/VOL- Menu Off: Volume up/down; Menu On: navigation & change settings
7. CH+/CH- Menu Off: Channel up/down; Menu On: navigation
8. OK Menu Off: Displays the current channel list;
Menu On: Activates the highlighted menu item.
9. MENU Menu Off: Opens the main menu. Menu On: You will get one step back.
Multimedia: Go to upper folder
10. EXIT Exits from the menu or sub-menu
11. INFO Shows the actual channel information
12. SUB Shows list of subtitle languages
13. EPG Shows the EPG (Electronic Program Guide) in TV mode
14.
● Records the TV program to the SD card
15. TIMESHIFT Activates the timeshift function
16.
tt / uu Fast rewind / Fast forward
17. TTX Shows Teletext on OSD (On Screen Display)
18. TV/RADIO Toggles between TV and RADIO mode
19. AUDIO Shows list of the current audio channel /language
20. GOTO Only used to go to desired position in Record/Playback mode
21. COLOURED BUTTONS For Multimedia and Teletext functions
Fig. 7, 8
The remote control transmits a directional infrared beam. Be sure to aim the remote
control directly at the infrared sensor of the unit during operation. If the sensor has
been covered or there is a large object between the remote control and the sensor, the
sensor will not respond. The sensor may not able to receive the remote signal when it
is exposed to direct sunlight or a strong artificial light (fluorescent or strobe light). In
this case, change the direction of the light or reposition the unit to avoid direct lighting.
4.0 FIRST TIME INSTALLATION
If you use the receiver for the first time, the “Easy Install” menu appears. Use the tu
buttons to change settings for setup of Region, OSD Language and Antenna Power
and the pq to select. Then use the pq buttons to move focus to Search and press
OK to proceed with the automatic channel scan.
5.0 MAIN MENU
In viewing mode always press MENU to enter the Main Menu. It consists of following
submenus: Channel, Installation, Setup, Tools and Media+