User manual

17
PART 1 • English
English
Problem Possible cause What to do
The external USB HDD
does not start
Power consumption is too high. Connect an extra power supply
adapter to your USB HDD
device.
A.2 SPECIFICATIONS
Demodulator
Demodulator: 16-QAM/64-QAM, QPSK
Transmission mode: 2 K, 8 K
Video Decoder
Profile level: MPEG-2 MP@ML
Video resolution: 720 x 576 pixels (PAL),
720 x 480 (NTSC)
Decoding & Video Out: PAL & NTSC
Aspect ratio: 4:3 Letterbox, 4:3 Pan & Scan, 16:9
Audio Decoder
MPEG MusiCam Layer II
Sampling rate: 32, 44.1, 48 KHz
Audio mode: Stereo, Joint Stereo,
Dual Mono, Mono
Tuner
Front End: DVB-T, UHF & VHF Tuner
Input frequency range: 174 ~ 230 MHz (VHF) and 470 ~ 862 MHz (UHF)
Loop through frequency range: 47 ~ 862 MHz
Input signal level: -78 ~ -20 dBm
Multimedia
Video recording and playback – MPEG-1 and MPEG-2 encoded (mpg)*
Audio playback – MP3 and WMA formats
Picture view – JPEG format
* STRONG cannot guarantee the playback of external video files, which have not been recorded by this device
Memory and System
Flash memory: 1 MByte
SDRAM: 16 MBytes
Connectors
ANT IN: IEC 169-2 Female
TO TV: IEC 169-2 Male
TV SCART (RGB, CVBS)
USB port Type Mini A
IR sensor port
DC IN 5V / 2A DC