User manual

PART 1 • English

of the antenna are in a good condition and the SCART connections are

well shielded

This manual provides complete instructions for installing and using this receiver.

The following symbols will serve as follow.

WARNING Indicates warning information.

Tips Indicates any other additional important or helpful information.

MENU Represents a button on the remote control. (Bold Character)

Move to Represents a menu item within a window. (Italic Character)

1.4 Accessories

 1 User Manual

 1 Remote control unit with 1 Battery (coin cell 3 V)

 1 Infrared eye

 1 Power adapter

 1 Mini-USB to USB converter cable

Note: The batteries should not be recharged, disassembled, electrically short-

circuited, mixed or used with other types of batteries.

If rechargeable accumulators instead of batteries will be used, we

recommend using (e.g. NiMH) types with low self-discharge to ensure long

time operation of remote control.

1.5 Usage of external USB devices

 It is recommended to use USB 2.0 storage devices. If your device is not

compatible to USB 2.0 speciﬁcations, recording, playback and other

multimedia functions of the receiver would not work properly.

 STRONG cannot guarantee compatibility to all types of USB storage devices.

 It is advised not to store important information on USB storage devices

used with the receiver. Always make backups of data on your USB

storage device before using it with this receiver. STRONG will not take

responsibility for any loss of information or circumstances caused by loss

of information.

 Please ensure that either the USB device is already formatted to FAT/

FAT32, or format the USB device via your receiver, refer to chapter 5.5.6

Disk Format for details.