Operation Manual

PART 1

English

 Edit satellite

If the parameters of the satellite were changed or the satellite is a new satellite, you must set the

parameters of the satellite, such as LNB type, LNB low Freq, LNB High Freq, Transponder, LNB Power,

22 k Tone, DiSEqC and Motor Position.

SCREEN 21

 Delete satellite

If you want to delete a satellite, press the YELLOW key. Then warning message will appear as below.

SCREEN 22

Select OK and press the OK key to confirm.

UM 6005-15 ENG 1/26/06 4:18 PM Page 25