User manual

PART 1 • English
16
To save changes press the YELLOW (Save) or BLUE (Save & Exit) button.
5.2.4 GOTO X set-up
In this menu you should set your geographical location, if your use positioner and it supports GOTO X.
Use pq buttons to navigate in the menu.
Use Numeric buttons to enter values. Use tu buttons to select an option.
To save changes you have made press YELLOW (Save) or BLUE (Save&Exit) button.
5.2.5 System set-up
In this menu, you can configure the system such as Language select, TV/VCR settings, OSD settings, Time
settings. As well from this menu you can define Power On channel, update software using Software Update
menu, get Information about software version installed in your receiver and do a Factory reset.
Language select
Select Menu language, preferred Audio and Subtitle languages.
Use pqtu buttons to move the menu focus and select an item. Use OK button to confirm selection.
TV/VCR settings
To set TV standard (PAL, SECAM, NTSC or Auto), Aspect conversion (Letter Box or Pan&Scan), TV format
(4:3 or 16:9), Scart mode (RGB or CVBS), UHF standard (NTSC, PAL BG, PAL I, PAL DK) and UHF channel
(21 ~ 69), press pqtu buttons to move the cursor and OK to confirm selection.
OSD settings
To set Banner duration (how long information banner will be displayed on screen), Transparency level
of the menu. Select Zapping mode in order to change appearance of picture during channel change. For
CAM messages appearance (On or OFF), use pqtu buttons to move the cursor and OK to confirm
selection. If CAM messages set to OFF then information messages generated by Conditional Access
Module would not be displayed on TV set screen. If set to ON then all information messages from CAM
will be displayed on TV set screen.
It is advisable to set CAM messages to OFF in order to avoid messages appearing during navigation
between channels.
Time settings
If a broadcaster provides GMT, you can set the time using GMT, or set the time by yourself. If the GMT
usage is ON then current time is set automatically. If your broadcaster provides correct time offset your
receiver will change summer/winter time automatically.
If GMT Usage is set to OFF, Set Data and Set Time item are displayed.
Time display: select “Stand-by only” to display time on front panel indicator only while receiver is in stand-by
mode. Select “Always” to display time on front panel indicator not depending from receiver mode. In this case
channel number on front panel indicator would not be displayed.
Power On channel
Use pq and OK buttons to select “Last viewed” to awake receiver with the last watched channel or to