User manual

PART 1 • English
17
English
select “Fixed channel” and define channel which should be displayed first every time when receiver awake
from stand-by.
Software update
Select this option in order to update your receiver with the latest software version. Software update service
is available from satellites ASTRA 1C, 1E, 1F at 19E and HOT BIRD 1, 2, 3, 4 at 13E.
If your antenna is aligned to ASTRA 1C, 1E, 1F at 19E then enter following parameters:
Frequency: 12603; Polarity: H (Horizontal); Symbol rate: 22000
If your antenna is aligned to HOT BIRD 1, 2, 3, 4 at 13E then enter following parameters:
Frequency: 12476; Polarity: H (Horizontal); Symbol rate: 27500
Press RED (Start). The receiver will check availability of software update and propose to update software
if new version is available. Follow future instructions displayed on screen. After software update process
receiver will switch on a last watched channel automatically.
Note: During software download process video output of the receiver will be turned off. Progress of
software download will be displayed on front panel indicator.
Availability of the software update is subject of local broadcast condition and may not work in all
countries. Contact your vendor to find out more about this function.
Warning: Never switch off power or disconnect the receiver from the antenna/main
power during update process!
Information
Display the information about software version installed in the receiver.
Factory reset
This will delete all user settings and installed channels. Receiver will restart with Installation Wizard menu.
Note: Information stored on your hard disk would not be deleted if your reset your receiver to the
factory default. Use “Format HDD” option from “Recorder” menu if you wish to erase all data
from the hard disk.
5.2.6 Parental lock
In this menu, you can set menu lock status (Disabled or Enabled) and change the PIN code.
To change PIN code you will have to enter current PIN code. Use [0..9] buttons to enter new PIN code
and confirm it. If Menu lock is enabled then PIN code will be required in order to access receiver settings.
The default PIN code is 0000.
5.3 Timer
You can set timer functions for designated actions, such as timer based recording, wake up or switch to
Standby.
Timer number: Use the tu buttons to select.
Timer status: Use tu buttons to Enable or Disable selected timer.
If selected timer status is Enabled the additional items are available to select.