User manual

PART 1 • English
24
8.4 Playback
There are two ways to access to your records:
n Press PDR button on remote control once.
n Press MENU, select Recorder, select Records Organiser
NOTE: If you have enabled HDD power save and did not use HDD (did not playback or record)
for a time set in HDD power save then appearing of the record list may take a while due to
receiver need to re-activate HDD.
Select a record you wish to playback and press OK button on remote control.
During a playback you can use following functions.
8.4.1 Information
Press INFO button in order to display information about record and playback progress. Information
banner provides you following details about playback: media name (/PDR or /USB), play mode,
current time and date, record’s number and name, date when record has been made, record duration,
audio mode, availability of subtitles and teletext, graphical interpretation of playback progress and
passed playback time. As well while information banner displayed on screen you will have access to
the extra functions. To remove playback information banner press INFO again or EXIT.
8.4.2 Fast forward and Fast rewind
Press button for Fast Forward or button for Fast Rewind. Every time when you presses these
buttons playback speed increased 2 times. Available options are x2, x4, x8, x16. Indication of play
speed is shown at the right upper corner of the screen. If you wish to return to normal playback
speed press u button.
8.4.3 Slow motion
Press (L-SLOW) button for forward slow motion or (R-SLOW) for backward slow motion.
Every time when you presses these buttons playback speed reduced 2 times. Available options are
x1/2, x1/4, x1/8. Indication of play speed is shown at the right upper corner of the screen. If you
wish to return to the normal playback speed then press u button.
8.4.4 Pause
To pause current playback simply press button. To continue playback simply press u button.
8.4.5 Repeat
If you would like to play current playback in a loop then press button during playback. Appropriated
symbol will be displayed on front panel indicator. To stop play in the loop press q button again.
8.4.6 Copy into file
This function allows you to copy a part of the recorded file into new file. During playback press
INFO button. The playback information banner will appear on screen. Use tu buttons to scroll in
the record to the point where you want to start copy and press & button. Use tu buttons to scroll
in the record to the point where you want to end copy and press & button. Confirm copy operation
with OK button or cancel with EXIT.