Operation Manual

PART 1 • English
18
you wish. If you wish to remove channel from favourite group select group “[0] – unselect”. Press EXIT to return to function selection.
5.3.4.3 Lock channel
Lock function is designed to give parents possibility to deny access of children to unwanted channels (channels with adult content, for
example). It is necessary to know PIN code to watch locked channels. It is recommended to change factory default PIN code to different.
To lock channel highlight
icon and press OK. Highlight the channel which you want to lock and press OK. If you wish to
unlock channel then repeat selection with OK button. Press EXIT to return to function selection.
5.3.4.4 Delete channel
To delete channel highlight
icon and press OK. Highlight the channel which you want to delete and press OK. Continue to
select other channels that you wish to delete. If you wish to unlock channel then repeat selection with OK button. Press EXIT to return to
function selection.
5.3.4.5 Add channel
Due to several reasons some channels can’t be found with automatic channel scan function. This function helps you to add single
channel. Before use this function you need to know details of channel which want to add.
To add new channel highlight
icon and press OK. Below menu will be displayed.
Select satellite and transponder of channel location. If transponder do not present in preset list you can enter it’s parameters directly in
this menu. Highlight “Channel name” and press OK. Enter channel name with keypad displayed. Enter value of Audio, Video and PCR
PID and press OK. Press EXIT to return to function selection.
5.3.4.6 Edit channel name
To edit channel name highlight
icon and press OK. Select channel which name you wish to edit and press OK. Use displayed
keyboard to edit the name, select Save function to store new name or Cancel to discard changes. Press
EXIT to return to function
selection.
5.3.5 Conditional Access
Press OK on “Conditional Access”. Following menu will appear.
In this menu you can select “Smart Card”, to access to the information
and settings of your Cryptoworks smart card, or “Common Interface”
to
access to the information and setting of installed Conditional Access
module.