Operation Manual

Other settings

Default Configuration Restoration

This menu allows you to return to factory preset parameters.

To access this menu, Receiver PIN code is requested.

Select Default Configuration Restoration field in the Configuration menu and

press OK, Default Configuration Restoration screen is displayed.

!Be cautious, if you press OK, ALL YOUR SETTINGS will be erased.

Press OK to return all parameters to default settings and return to Configuration

menu.

Information

Select Information in the Main menu and press OK.

Information menu is displayed and Decoder Information field is highlighted.

Press OK to access Decoder Information menu.

Decoder Information

This menu allows you to get information on your set-top box, (model name, firmware

version, software version, serial number…).

! These data could be of interest for your Viasat customers care service.

Press BACK to return to Information menu or press EXIT to exit the menu.

Signal Quality

Select Signal Quality field in the Information menu and press OK, Signal Quality

screen is displayed.

This menu allows you to check the quality of the satellite signal received by your set-top box.

Check that the signal is correct and press BACK to return to Information menu or

press EXIT to exit the menu.