Operation Manual

Specification
35
EN
Specification
Due to continued product improvement, this specification may change without notice.
General
Operating voltage: 12 V DC
Power consumption: 20 W (max.)
Weight: 1.3 kg
Dimensions (W x H x D): 252 mm x 42 mm x 138 mm
Operating temperature range: 0°C to +40°C
Storage temperature range: -20°C to +60°C
Rear and side panel connectors
Input: DC
Telephone line: RJ11
Others: TV Scart, VCR Scart, Video cinch, audio cinch, Tuner RF,
SPIDIF coaxial
Dish input: IEC 169-24 F-type female
Problem
You've forgotten
your PIN.
The menus and
banners are in
a language you
don't understand.
Your decoder doesn’t
react when you press
a key of the RCU
(the Red
led on the front
panel doesn’t blink).
Possible cause
The menu language
has been changed to
a language you don't
understand.
Your RCU might be
configurated for
DVD, VCR or TV
devices.
Suggested solution
Call customer support for advice.
You can change the menu language as follows:
1. From a digital satellite channel, press MENU.
2. Press W, 3 times to highlight the Preferences
item on the menu, then press OK.
3. Press OK.
The Preferences menu displays.The first,
highlighted item is the language item, press OK.
4. Press B until your language displays.
5. Press BACK. The menus should now be in
your preferred language.
6. Press EXIT to redisplay digital satellite TV.
Press SAT key on the RCU.